Writing effective, compelling dialogue has multiple elements. It’s not only what characters say but how they say it that matters. Read other words for said as well as tips for keeping your dialogue natural and engrossing:
What is a ‘dialogue tag’?
Tags (like name tags) identify.
In written conversation or dialogue, a tag is a group of words following quoted speech (e.g. ‘she said’). It identifies who spoke and/or the tone or emotion behind their speech. Words for ‘said’ may show or suggest:
- Volume (e.g. yelled, shouted, bellowed, screamed, whispered)
- Tone or pitch (e.g. shrieked, groaned, squeaked)
- Emotion (e.g. grumbled, snapped, sneered, begged)
- Intent (e.g. suggested, asked, demanded)
The connotations of dialogue tags are important. It would be strange, for example, for a character to ‘sneer’ the words ‘I love you’, since the word ‘sneer’ connotes contempt rather than affection. Unless their words ran counter to how they truly felt. Even then, this would maybe need additional, clarifying narration.
Given that there are countless verbs that can take the place of ‘said,’ should you simply find a stronger, more emotive one and use that?
Not always. ‘He said’ and ‘she said’ are often preferable because they do not draw the reader’s attention to the fact they are reading written dialogue. They let characters’ words do the emoting.
Read more in our complete guide to dialogue.
Here are some tips for using dialogue tags such as said and synonyms for said well:
How to use said and its synonyms well:
- Use all dialogue tags sparingly
- Use said or other tags only where necessary
- Show how people speak using action and gesture
1. Use all dialogue tags sparingly
The problem with dialogue tags is they draw attention to the author’s hand. The more we read ‘he said’ and ‘she said’, the more we’re aware of the author creating the dialogue.
Novel writing coach Romy Sommer says of dialogue:
Keep it as tight as possible, and move as quickly as possible into the purpose of the conversation.
Romy Sommer in ‘Writing dialogue: What to avoid’, webinar preview here.
Whenever you read the author attributing who said what, it reminds us a narrative convention is being used.
Compare these two versions of the same conversation:
“I told you already,” I said, glaring.
“Well I wasn’t listening, was I!” he said.
“Apparently not,” he replied.
Now compare this to the following:
I glared at him. “I told you already.”
“Well I wasn’t listening, was I!”
For some authors, it’s a matter of stylistic preference.
Even so, it’s hard to argue that the first version is better than the second. In the second, making glaring an action rather than tethering it to the dialogue gives us a stronger sense of the scene. A stronger sense of dialogue’s ‘back and forth’.
Because it’s clear the glaring first-person ‘I’ is the character speaking at first, we don’t need to add ‘I said’. The strength of the exclamation mark in the second character’s reply makes any dialogue tag showing emotion (e.g. ‘he snapped’) unnecessary. Because it’s on a new line, and responds to what the other said, we know it’s a reply from context.
Similarly, in the first speaker’s retort, we don’t need a tag telling us his tone (that it’s curt, sarcastic, or hostile). The brevity, the fact it’s only two words, conveys his tone. We can infer the character is still mad.
Using dialogue tags sparingly allows your reader the pleasure of inferring and imagining.Tweet This
The reader gets to fill in the blank spaces, prompted more subtly by the clues you leave (an exclamation mark or a pointed, cross remark).
Make a Strong Start to your Book
Join Kickstart your Novel and get professional feedback on your first three chapters and story synopsis, plus workbooks and videos.Learn More
2. Use said or other tags only where necessary
The word ‘said’, like ‘asked’, does not tell you anything about the emotion behind a character’s words. Often, this is preferable, letting the character’s emotion or tone show in their precise choice of words, phrasing, movement (more on this below) or gestures.
In conversation between characters, alternatives for said can tell the reader:
- The individual emotional or mental states of the conversants
- The degree of conflict or ease in the conversation
- What the relationship is like between characters (for example, if one character always snaps at the other this will show that the character is short-tempered and perhaps unkind towards the other)
Here are dialogue words you can use instead of ‘said’, categorised by the kind of emotion or scenario they convey:
Shouted, bellowed, yelled, snapped, cautioned, rebuked.
Consoled, comforted, reassured, admired, soothed.
Shouted, yelled, babbled, gushed, exclaimed.
Whispered, stuttered, stammered, gasped, urged, hissed, babbled, blurted.
Declared, insisted, maintained, commanded.
Sighed, murmured, gushed, laughed.
Cried, mumbled, sobbed, sighed, lamented.
Jabbed, sneered, rebuked, hissed, scolded, demanded, threatened, insinuated, spat, glowered.
Apologised, relented, agreed, reassured, placated, assented.
Teased, joked, laughed, chuckled, chortled, sniggered, tittered, guffawed, giggled, roared.
Related, recounted, continued, emphasized, remembered, recalled, resumed, concluded.
Despite there being many other words for said, remember to use dialogue tags and ‘said’ synonyms only where necessary:
- Is it clear who’s speaking? (E.g. There are only two characters in the scene and the first to speak is clear). If yes, you don’t need a tag
- Too many tags make your dialogue start to feel like a compendium of emotive speech-verbs. Use colourful dialogue tags occasionally, for emphasis. They’re the salt and spice in dialogue, not the whole meal
- Use emotive dialogue tags for the peaks and valleys of a scene. If a character screams or declares every line, your reader may become irritated by the constant visibility of the author’s hand
Over at The Write Practice, Kellie McGann takes a look at dialogue tags and how to use them effectively in your writing.
3. Show how people speak using action and gesture
One problem we often see in beginners’ dialogue is that all the emotion is crammed into either spoken words or dialogue tags.
Characters who never move or gesture in dialogue may read a little like talking heads in jars (like the satirical preserved famous figures in the sci-fi comedy Futurama).
Your characters likely do have bodies, so don’t be afraid to use them. Compare these examples:
“That’s not what you said yesterday,” she said, her voice implying she was retreating, withdrawing.
“Well I hadn’t thought about it yet. The truth is now that I’ve had time I see that maybe it’s not going to work out. But let’s not be hasty,” he said, clearly wanting to control her retreat, too.
“That’s not what you said yesterday…” She hesitated, turned and walked to the window.
“Well I hadn’t thought about it yet.” He stepped closer. “The truth is now that I’ve had time I see that maybe it’s not going to work out. But let’s not be hasty.” He placed his hand on the small of her back.
In the second example, the dialogue is interspersed with setting. How the characters engage with the setting (the woman turning to face the window, for example) reveals their emotions mid-dialogue.
Movement and gesture conveys similar feelings to the first dialogue example. Yet there’s a clearer sense of proximity and distance, of two characters dancing around each other’s words, thoughts, feelings and personal space. It is appropriate too, to the situation (the end of an intimate relationship).
Vary the way you show who’s speaking in your dialogue. Use emotive other words for said to season characters’ conversations. Yet seasoning shouldn’t overpower substance. Use the content of what characters say, their movement, body language, pauses, and silences, to create deeper, more layered exchanges.
Join a concise, self-study four-week course to learn how to write dialogue that builds character and plot without needing 500 words for said.
432 replies on “Dialogue words: Other words for ‘said’ (and what to avoid)”
i like this website a lot it helps me
This was awesome, I kept referring back to this page, and my vocabulary got so much bigger.
Hi Little_Cat, thank you for your kind feedback, I’m glad you found this article useful.
Thank you for sharing this article with category-wise dialog words. I have one question, though. Can we use ‘thought’ also as a dialogue verb/word? An example: “Then, we have to get some solid proof somehow,” thought John.
Great question. This can be used to indicate a thought, but is maybe best used for thoughts that are spoken aloud as the speech marks make it easy to confuse with spoken/voiced material. So the more common approach for thoughts is to italicize the thought. In this case, if the surrounding narration is in third person, the thought is written in first-person, present-tense (since it occurs in the unfolding moment).
Example: They had plenty of evidence, but hardly enough to sway a jury. Then we have to get some solid proof somehow, thought John.
It looks like I missed an email from your website about your reply. I have seen your reply just now. Thank you for your clarification. Now, I realize that we quite frequently say “I think ….” while speaking with others. So usage of the verb “thought” as a dialog verb seems right!